Valorización de pellets combustibles usando aserrín de 23 especies de maderas mexicanas
DOI:
https://doi.org/10.54167/tch.v19i1.1829Palabras clave:
madera de pino, maderas latifoliadas, biocombustibles densificados, biomasa residual, bioenergíaResumen
Se ha observado un deterioro medioambiental debido al crecimiento económico enlazado al respectivo consumo de combustibles fósiles a nivel mundial, pero también se han desarrollado investigaciones sobre biocombustibles alternativos para intentar reducir el uso de energía fósil. En este sentido, la biomasa lignocelulósica, como energía renovable, juega un rol importante para la generación de biocombustibles sólidos densificados, procurando disminuir la utilización de hidrocarburos fósiles y promoviendo una energía ecoeficiente. En el presente estudio se elaboraron pellets combustibles con 23 muestras de aserrín obtenido en diferentes empresas forestales en 5 estados de la República Mexicana. Se realizó una evaluación física, mecánica y energética de los pellets obtenidos. Se encontraron diferencias estadísticas significativas en las evaluaciones realizadas. Los resultados más relevantes variaron como sigue: contenido de humedad (2.69 – 8.73 %), densidad de partícula (1.08 – 1.32 g/cm3), densidad a granel (532 – 668 kg/m3), índice de resistencia al impacto (100 a 250 %), resistencia a la compresión (178 – 1542 N/mm), poder calorífico (15.42 – 20.85 MJ/kg) y densidad energética (9.32 – 13.07 GJ/m3). De acuerdo con la evaluación física, mecánica y energética, los pellets elaborados con las diferentes muestras de aserrín tienen en general buena calidad para su uso residencial local o industrial.
DOI: https://doi.org/10.54167/tch.v19i1.1829
Descargas
Referencias
Acampora, A., Civitarese, V., Sperandio, G., & Rezaei, N. (2021). Qualitative Characterization of the Pellet Obtained from Hazelnut and Olive Tree Pruning. Energies 14(14): 4083. https://doi.org/10.3390/en14144083
Adebayo, T.S., Awosusi, A.A., Kirikkaleli, D., Akinsola, G.D., & Mwamba, M.N. (2021). Can CO2 emissions and energy consumption determine the economic performance of South Korea? A time series analysis. Environ Sci Pollut Res 28: 38969–38984. https://doi.org/10.1007/s11356-021-13498-1
Aguilar-Sánchez, P., Carrillo-Ávila, N., Carrillo-Parra, A., Pérez-Martínez, A., & Núñez- Retana, V.D. (2022). Evaluación de los parámetros de producción de pellets de Pinus patula para una estandarización de calidad en México. Tendencias en Energías Renovables y Sustentabilidad 1(1): 158–164. https://doi.org/10.56845/terys.v1i1.166
Amador-Hernández, J.C. (2015). Ley de Transición Energética. Dirección General de Difusión y Publicaciones, México. http://bibliodigitalibd.senado.gob.mx/handle/123456789/2315
ASABE Standards. (2006). S269.4: Cubes, pellets and crumbles definitions and methods for determining density, durability and moisture content. St. Joseph: American Society of Agricultural and Biological Engineers.
ASTM D143. (2007). Standard methods of testing small specimens of timber. ASTM International, West Conshohocken, PA, USA.
ASTM D2166–85. (2008). Standard test method of compressive strength of wood. ASTM International, West Conshohocken, PA, USA.
ASTM D440–68. (2007). Standard test method of drop shatter test for coal. ASTM International, West Conshohocken, PA, USA.
ASTM E872−82. (2013). Standard test method for volatile matter in the analysis of particulate wood fuels. ASTM International, West Conshohocken, PA, USA.
Bala‑Litwiniak, A., & Radomiak, H. (2019). Possibility of the Utilization of Waste Glycerol as an Addition to Wood Pellets. Waste and Biomass Valorization 10: 2193–2199. https://doi.org/10.1007/s12649-018-0260-7
Bandara, J.C., Jaiswal, R., Nielsen, H.K., Moldestad, B.M.E., & Eikeland, M.S. (2021) Air gasification of wood chips, wood pellets and grass pellets in a bubbling fluidized bed reactor. Energy 233: 121149. https://doi.org/10.1016/j.energy.2021.121149
Baasch, S. (2021). Energy transition with biomass residues and waste: Regional-scale potential and conflicts. A case study from North Hesse, Germany. J. Environ. Policy Plan. 23(2): 243–255. https://doi.org/10.1080/1523908X.2021.1888701
Carrillo-Parra, A., Ngangyo-Heya, M., Colín-Urieta, S., Foroughbakhch, R., Rutiaga-Quiñones, J.G., & Correa-Méndez, F. (2018). Physical, mechanical and energy characterization of wood pellets obtained from three common tropical species. PeerJ 6: e5504. https://doi.org/10.7717/peerj.5504
Carrillo-Parra, A., Rutiaga-Quiñones, J.G., Ríos-Saucedo, J.C., Ruiz-García, V.M., Ngangyo-Heya, M., Nava-Berúmen, C.A., & Núñez-Retana, V.D. (2021). Quality of Pellet Made from Agricultural and Forestry Waste in Mexico. BioEnergy Research 15, 977–986. https://doi.org/10.1007/s12155-021-10327-8
Chávez-Rosales, J.S., Pintor-Ibarra, L.F., González-Ortega, N., Orihuela-Equihua, R., Ruiz-Aquino, F., Lujan-Álvarez, C., & Rutiaga-Quiñones, J.G. (2021). Basic chemical composition of Pinus spp. sawdust from five regions of Mexico, for bioenergetic purposes. BioResources 16(1): 816-824. https://doi.org/10.15376/biores.16.1.816-824
Chen, W.H., Peng, J., & Bi, X.T. (2015). A state-of-the-art review of biomass torrefaction, densification and applications. Renewable and Sustainable Energy Reviews 44: 847-866. https://doi.org/10.1016/j.rser.2014.12.039
DIN 51731. (1996). Testing of solid fuels – Compressed untreated wood, requirements and testing. Deutsches Institut für Nörmung. Berlin.
EN 18134–3. (2015). Biocombustibles Sólidos. Determinación del contenido de humedad. Método de secado en estufa. Parte 3: Humedad de la muestra para análisis general. Asociación Española de Normalización y Certificación (AENOR), Madrid, España.
EN ISO 17828. (2015). Biocombustibles Sólidos. Determinación de la Densidad a Granel. Asociación Española de Normalización y Certificación (AENOR), Madrid, España.
Forero-Nuñez, C.A., Jochum, J., & Sierra, F.E. (2015). Effect of particle size and addition of cocoa pod husk on the properties of sawdust and coal pellets. Ingeniería e Investigación 35(1): 17–23. https://doi.org/10.15446/ing.investig.v35n1.46157
García, C.A., Riegelhaupt, E., & Masera, O. (2016). Introducción. In: García-Bustamante, C.A., Masera, O. (Eds.) Estado del Arte de la Bioenergía en México. Red Temática de Bioenergía (RTB) del CONACYT (pp. 9–14). Imagia Comunicación: Guadalajara, Mexico.
García, D.P., Caraschi, J.C., Ventorim, G., Vieria, F.H.A., & Protásio, T.P. (2018). Comparative Energy Properties of Torrefied Pellets in Relation to Pine and Elephant Grass Pellets. BioResources 13(2): 2898-2906. http://dx.doi.org/10.15376/biores.13.2.2898-2906
Gutiérrez-Acosta, J.M., Orihuela-Equihua, R., Pintor-Ibarra, L.F., González-Ortega, N., Hernández-Solís, J.J., Ruíz-Aquino, F., Navarrete-García, M.A., & Rutiaga-Quiñones, J.G. (2021). On the Basic Chemical Composition of Selected Biomass Types from Four Regions of Mexico, for Bioenergetic Purposes. BioResources 16(3): 5694-5705. http://dx.doi.org/10.15376/biores.16.3.5694-5705
Hansen, M.T., Jein, A.R., Hayes, S., & Bateman, P. (2009). English handbook for wood pellet combustion. EUBIA - European Biomass Industry Association.
Hiloidhari, M., Baruah, D.C., Kumaria, M., Kumari, S., & Thakur, I.S. (2019). Prospect and potential of biomass power to mitigate climate change: A case study in India. Journal of Cleaner Production 220: 931-944. https://doi.org/10.1016/j.jclepro.2019.02.194
Ilari, A., Foppa Pedretti, E., De Francesco, C., & Duca, D. (2021). Pellet Production from Residual Biomass of Greenery Maintenance in a Small-Scale Company to Improve Sustainability. Resources 10(12): 122. https://doi.org/10.3390/resources10120122
ISO 17225–2. (2021). Solid biofuels. Fuel specifications and classes. Part 2: Graded wood pellets.
Kocer, A., & Kurklu, A. (2020). Production of pellets from pruning residues and determination of pelleting physical properties. Energy Sources, Part A Recover Util Environ Ef 44(4): 10346-10358. https://doi.org/10.1080/15567036.2020.1752857
Manual ENplus. (2015). Esquema de certificación de calidad para pellets de madera. Parte 3: Requisitos de calidad de los pellets. European Pellet Council (EPC). Bruselas, Bélgica. https://goo.su/7uSfn
Michelena, M.C., & Martín, F.M. (2008). Los Biocombustibles. Ediciones Mundi-Prensa.
Morales-Máximo, M., Ruíz-García, V.M., López-Sosa, L.B., & Rutiaga-Quiñones, J.G. (2020). Exploitation of Wood Waste of Pinus spp. for Briquette Production: A Case Study in the Community of San Francisco Pichátaro, Michoacán, Mexico. Appl. Sci.10(8): 2933. https://doi.org/10.3390/app10082933
Morales-Máximo, M., Rutiaga-Quiñones, J.G., Masera, O., & Ruiz-García, V.M. (2022). Briquettes from Pinus spp. Residues: Energy Savings and Emissions Mitigation in the Rural Sector. Energies 15(9): 3419. https://doi.org/10.3390/en15093419
Moran, P., Goggins, J., & Hajdukiewicz, M. (2017). Super-insulate or use renewable technology? Life cycle cost, energy and global warming potential analysis of nearly zero energy buildings (NZEB) in a temperate oceanic climate. Energy and Buildings 139: 590–607. https://doi.org/10.1016/j.enbuild.2017.01.029
Mostafa, M., Hu, S., Wang, Y., Su, S., Hu, X., Elsayed, S., & Xiang, J. (2019). The significance of pelletization operating conditions: An analysis of physical and mechanical characteristics as well as energy consumption of biomass pellets. Renewable and Sustainable Energy Reviews 105: 332–348. https://doi.org/10.1016/j.rser.2019.01.053
Núñez-Retana, V.D., Escobedo-Bretado, M.Á., Quiñones-Reveles, M, Ruíz-Aquino, F., & Carrillo-Parra, A. (2019). Efecto del contenido de humedad sobre pélets de aserrín de madera de Pinus spp. Revista Mexicana de Agroecosistemas 6(2): 136-144. https://revistaremaeitvo.mx/index.php/remae/article/view/121
Nwabueze, Q.A., & Leggett, S. (2024). Advancements in the Application of CO2 Capture and Utilization Technologies—A Comprehensive Review. Fuels 5(3): 508-532. https://doi.org/10.3390/fuels5030028
Onochie, U.P., Obanor, A.I., Aliu, S.A., & Igbodaro, O.O. (2017). Proximate and ultimate analysis of fuel pellets from oil palm residues. Niger J Technol 36(3): 987–990. https://doi.org/10.4314/njt.v36i3.44
Østergaard, P.A., Duic, N., Noorollahi, Y., Mikulcic, H., & Kalogirou, S. (2020). Sustainable development using renewable energy technology. Renewable Energy 146: 2430–2437. https://doi.org/10.1016/j.renene.2019.08.094
Peng, J., Wang, J., Bi, X.T., Lim, C.J., Sokhansanj, S., Peng, H., & Jia, D. (2015). Effects of thermal treatment on energy density and hardness of torrefied wood pellets. Fuel Process. Technol. 129: 168–173. https://doi.org/10.1016/j.fuproc.2014.09.010
Park, S., Kim, S.J., Oh, K.Ch., Cho, L., Kim, M.J., Jeong, I.S., Lee, Ch.G., & Kim, D. (2019). Investigation of agro-byproduct pellet properties and improvement in pellet quality through mixing, Energy 190: 116380. https://doi.org/10.1016/j.energy.2019.116380
Qazi, A., Hussain, F., Rahim, N. A. B. D., Hardaker, G., Alghazzawi, D., Shaban, K., & Haruna, K. (2019). Towards Sustainable Energy: A Systematic Review of Renewable Energy Sources, Technologies, and Public Opinions. IEEE Access 7: 63837–63851. https://doi.org/10.1109/ACCESS.2019.2906402
Pinilla, J.C., Luengo K., Lobo, F., Navarrete, M., & Navarrete, F. (2022). Comparación de la normativa nacional y europea para la producción de pellet de madera. Ciencia & Investigación Forestal 28(1): 73-79. https://doi.org/10.52904/0718-4646.2022.561
Ramírez-Ramírez, M.A., Carrillo-Parra, A., Ruíz-Aquino, F., Hernández-Solís, J.J., Pintor-Ibarra, L.F., González-Ortega, N., Orihuela-Equihua, R., Carrillo-Ávila, N., & Rutiaga-Quiñones, J.G. (2022). Evaluation of selected physical and thermal properties of briquette hardwood biomass biofuel. BioEnergy Research 15: 1407-1414. https://doi.org/10.1007/s12155-022-10391-8
Ramírez-Ramírez, M.A., Carrillo-Parra, A., Ruíz-Aquino, F., Pintor-Ibarra, L.F., González-Ortega, N., Orihuela-Equihua, R., Carrillo-Ávila, N., Luján-Álvarez, C., & Rutiaga-Quiñones, J.G. (2021). Valorization of briquettes fuel using Pinus spp. sawdust from five regions of Mexico. BioResources 16(2): 2249-2263. http://dx.doi.org/10.15376/biores.16.2.2249-2263
Rennkamp, B., Haunss, S., Wongsa, K., Ortega, A., & Casamadrid, E. (2017). Competing coalitions: The politics of renewable energy and fossil fuels in Mexico, South Africa and Thailand. Energy Research & Social Science 34: 214–223. https://doi.org/10.1016/j.erss.2017.07.012
Rutiaga-Quiñones, J.G., Pintor-Ibarra, L.F., Orihuela-Equihua, R., González-Ortega, N., Ramírez-Ramírez, M.A., Carrillo-Parra, A., Carrillo-Ávila, N., Navarrete-García, M.A., Ruíz-Aquino, F., Rangel-Méndez, J.R., Hernández-Solís, J.J., & Luján-Álvarez, C. (2020). Characterization of Mexican Waste Biomass Relative to Energy Generation. BioResources 15(4): 8529-8553. http://dx.doi.org/10.15376/biores.15.4.8529-8553
Ruiz-Aquino, F., Ruiz-Ángel, S., Santiago-García, W., Fuente-Carrasco, M.E., Sotomayor-Castellanos, J. R., & Carrillo-Parra, A. (2019). Energy characteristics of wood and charcoal of selected tree species in Mexico. Wood Res. 64(1): 71-82. https://goo.su/4c5wbn
Sette, C.R.Jr., Santiago-Hansted, A.L., Novaes, E., Fonseca-e-Lima, P.A., Rodrigues-de-Souza-Santos, A., & Minoru-Yamaji, F. (2018). Energy enhancement of the eucalyptus bark by briquette production. Ind Crops Prod 122: 209–213. https://doi.org/10.1016/j.indcrop.2018.05.057
Sgarbossa, A., Costa, C., Menesatti, P., Antonucci, F., Pallotinno, F., Zanetti, M., Grigolato, S., & Cavalli, R. (2015). A multivariate SIMCA index as discriminant in wood pellet quality assessment. Renewable Energy 76: 258–263. https://doi.org/10.1016/j.renene.2014.11.041
Sher, F., Pans, M.A., Afilaka, D.T., Sun, Ch., & Liu, H. (2017). Experimental investigation of woody and non-woody biomass combustion in a bubbling fluidised bed combustor focusing on gaseous emissions and temperature profiles. Energy 141: 2069-2080. https://doi.org/10.1016/j.energy.2017.11.118
Stolarski, M.J., Warmiński, K., Krzyżaniak, M., & Olba–Zięty, E. (2022). Cascaded use of perennial industrial crop biomass: The effect of biomass type and pre-treatment method on pellet properties. Industrial Crops and Products 185: 115104. https://doi.org/10.1016/j.indcrop.2022.115104
Sulaiman, C., Abdul-Rahim, A.S., & Ofozor, C. A. (2020). Does wood biomass energy use reduce CO2 emissions in European Union member countries? Evidence from 27 members. Journal of Cleaner Production 253: 119996. https://doi.org/10.1016/j.jclepro.2020.119996
Thek, G., & Obernberger, I. (2012). The pellet handbook: the production and thermal utilization of biomass pellets. Abingdon: Routledge. https://doi.org/10.4324/9781849775328
EN 14961–2. (2012). Biocombustibles sólidos. Especificaciones y clases de combustibles. Parte 2: Pélets de madera para uso no industrial. Asociación Española de Normalización y Certificación (AENOR), Madrid, España. https://goo.su/Kd0Tp
UNE EN 14961–6. (2012). Biocombustibles sólidos. Especificaciones y clases de combustibles. Parte 6: Pélets no leñosos para uso no industrial. Asociación Española de Normalización y Certificación (AENOR), Madrid, España. https://goo.su/rD1Ub
UNE-EN 14918. (2011). Determinación del poder calorífico. Norma Europea, CEN Comité Europeo para Estandarización. Madrid, España. https://goo.su/Juu2
UNE-EN ISO 18122. (2023). Biocombustibles Sólidos. Determinación del contenido de ceniza. Estándar Europeo, CEN Comité Europeo para Estandarización. Madrid, España. https://www.une.org/encuentra-tu-norma/busca-tu-norma/norma?c=N0071397
Velázquez-Martí, B. (2018). Aprovechamiento de la biomasa para uso energético. Editorial Reverté.
Wang, C., Chang, Y., Zhang, L., Pang, M., & Hao, Y. (2017). A life-cycle comparison of the energy, environmental and economic impacts of coal versus wood pellets for generating heat in China. Energy 120: 374–384. https://doi.org/10.1016/j.energy.2016.11.085
Yuping, L., Ramzan, M., Xincheng, L., Murshed, M., Awosusi, A.A., BAH, S.I., & Adebayo, T.S. (2021). Determinants of carbon emissions in Argentina: The roles of renewable energy consumption and globalization. Energy Reports 7: 4747-4760. https://doi.org/10.1016/j.egyr.2021.07.065
Publicado
Número
Sección
Licencia
Derechos de autor 2025 TECNOCIENCIA Chihuahua

Esta obra está bajo una licencia internacional Creative Commons Atribución-NoComercial 4.0.







